Directional Coronary Atherectomy
(DCA) is a minimally invasive procedure to remove
the blockage from the coronary arteries and allow
more blood to flow to the heart muscle and ease
the pain caused by blockages.
The procedure begins with the doctor injecting
some local anesthesia into the groin area and
putting a needle into the femoral artery, the
blood vessel that runs down the leg. A guide
wire is placed through the needle and the needle
is removed. An introducer is then placed over
the guide wire, after which the wire is removed.
A different sized guide wire is put in its place.
Next, a long narrow tube called a diagnostic catheter is advanced through the
introducer over the guide wire, into the blood vessel. This catheter is then
guided to the aorta and the guide wire is removed. Once the catheter is placed
in the opening or ostium of one the coronary arteries, the doctor injects dye
and takes an x-ray.
If a treatable blockage is noted, the first
catheter is exchanged for a guiding catheter.
Once the guiding catheter is in place, a guide
wire is advanced across the blockage, then a
catheter designed for lesion cutting is advanced
across the blockage site. A low-pressure balloon,
which is attached to the catheter adjacent to
the cutter, is inflated such that the lesion
material is exposed to the cutter.
The cutter spins, cutting away pieces of the
blockage. These lesion pieces are stored in a
section of the catheter called a nosecone, and
removed after the intervention is complete. Together
with rotation of the catheter, the balloon can
be deflated and re-inflated to cut the blockage
in any direction, allowing for uniform debulking.
A device called a stent may be placed within
the coronary artery to keep the vessel open.
After the intervention is completed the doctor
injects contrast media and takes an x-ray to
check for any change in the arteries. Following
this, the catheter is removed and the procedure
is completed.
|